3D SIGNAGE
Signs people stop to look at.
Logo walls, lit letters, neon-style signs and shopfront lettering, 3D printed and fitted with LEDs in our Mosta workshop. Or something stranger: letters that drip, words full of moss, a balcony that glows.
QUOTE MY SIGN
MADE IN MOSTA
Any shape your sign needs to be.
Most signs are cut from flat sheet, so they all end up looking alike. A 3D printed sign is built up layer by layer, which means letters can be deep, rounded, hollow or textured, a logo can stand off the wall, and a sign can be shaped like the thing you sell. We print it, fit the LEDs ourselves, and either install it with our installation team or hand it over ready for your own installer. Reception walls, shop fronts, cafés, clinics, hotel corridors and front doors: one sign or a matching set.
LIT IN-HOUSE
Halo glow, back-lit panels and LED neon-style lines, fitted in our own workshop. Or no lights at all: plenty of signs look best unlit.
INDOORS OR OUT
Signs are printed in PETG, which is tough and weather-resistant, so they work outside as well as in. Indoor signs can use the full range of colours and finishes.
READY IN ABOUT A WEEK
A design preview and a price within one working day, then the finished sign in about a week. No minimum: one door sign is fine.
SELECTED WORK
From the reception wall to the very strange.
Examples of pieces we make.
IN DETAIL
3D Signs & LED Signage — the practical answers.
What kinds of sign can you make?
Small and medium signs, indoor and outdoor: 3D logo walls for receptions, raised or halo-lit letters, LED neon-style signs, shopfront lettering, illuminated house names and numbers, door, room and wayfinding signs, and counter or table signs. Because nothing is cut from flat sheet, a sign can also be a shape: a giant pair of glasses for an optician, a balcony for a café, letters that melt for a gelato shop, or a word planted with moss.
Do you fit the lights?
Yes. The LEDs are fitted in our workshop, so the sign arrives lit and tested. We agree the lighting with you first: a soft halo on the wall behind the letters, letters lit from inside, a neon-style line, or a back-lit panel. Tell us where the sign will be powered from and we will plan the wiring around it.
Do you install signs?
Yes, if you want us to. Installation is done by our professional installation team at €400 a day (the minimum), which covers everything to do with fitting the sign; installation materials are charged at cost on top. A day covers a standard job of about 3.5 × 1 m; for anything bigger or unusual we visit the site first. Prefer your own installer? We supply the sign with an installation design and they fit it. Either way, tell us what the sign is going on, such as limestone, render, plasterboard or glass, and roughly where the power is.
Will a 3D printed sign last outdoors?
Yes, when it is printed in the right material. Our signs are printed in PETG, which is tough and weather-resistant; ordinary PLA softens at around 60°C and fades in UV, so we do not use it outside. For a lit outdoor sign, the LEDs and wiring are chosen and sealed for outdoor use too.
Materials for this category
PETG for signs, indoors and out, because it is tough and weather-resistant. PLA for indoor display pieces, in matte, silk, translucent and glow colours. Painted, glossy or textured finishes where a design needs them. Lighting and materials are agreed per sign before printing.
Compare all materials →
QUESTIONS
3D Signs & LED Signage — common questions
How long does a sign take?
- About a week from when you approve the design. You get a design preview and a price within one working day of sending your logo or wording. If you have an opening date, tell us when you enquire.
How big can a sign be?
- We make small and medium signs: door and room signs, house names, counter signs, reception logo walls and shopfront lettering. Tell us the space it needs to fill and we will say straight away whether it suits 3D printing.
What do you need from me to quote?
- Your logo (a vector file such as AI, SVG or PDF is best, but a clear image works) or the exact words, roughly how big, indoors or outdoors, whether it should light up, and what it will be mounted on.
Do you install the sign?
- Yes, if you want us to. Installation is done by our professional installation team at €400 a day (the minimum), which covers everything to do with fitting the sign; installation materials are charged at cost on top. A day covers a standard job of about 3.5 × 1 m; for anything bigger or unusual we visit the site first. Prefer your own installer? We supply the sign with an installation design and they fit it.
Need a sign?
Send us your logo or the words, roughly how big, indoors or out, whether it should light up, and whether you need it installed. We will come back with a design preview and a price within one working day.